End Face Drilling Four Station Automatic Balancing Machines


End Face Drilling Four Station Automatic Balancing Machines

Features

1. Automatic loading and unloading of the assembly line

2. 12 inch human-machine interface

3. Six-axis linkage simultaneous processing

4. Short product replacement time

5. Soft-bearing balance measurement system

6. Widely used in balance measurement and correction of water pumps and other products which need remove weight on end face can be connected to rotor production line to achieve automatic production

Technical Specifications

Technical data at a glance A4WZ1
Max Weight of Workpiece (kg) 1.6
Max Diameter of Workpiece (mm) 30-130
Journal Diameter (mm) φ5-16
Balancing Speed (r/min) ,≤2500
Balancing Motor Power (kw) 0.4 KW Servo Motor
Min Achievable Residual Unbalance Amount (g.mm/kg) ≤0.3
Testing Time (second) 5-9
Reduction Rate of Unbalance ≥90%
Working Pressure (MPa) 0.4-0.6
Operating Voltage (V) AC: 380V external
Milling Mode Drilling
Take Time (second) 12-15 Drilling once on the left and right side
Drilling Power (kw) 0.75
Average Machine Consumption(l/min) 50
Balancing Machine Type Soft Bearing Measuring Bracket
Machine Total Power (kw) 9.5
Protection Phase Sequence Protection, Overload Protection, Air Pressure Monitoring