Bearing Induction Heater - RIH-1003


Bearing Induction Heater - RIH-1003

ROKADE HI-1003 can be used for installation of Gear Drives and replacement of large Bearings, rings and couplings resulting in qualitative assembling and dismantling of bearings and gear drives. This instrument weighs 75 kg and can be used to heat large sized Bearings of up to 300 kg with a minimum inner diameter of 60 mm and maximum outer diameter of 650mm.

Technical Specifications

Product Data RIH - 1003
Diameter mm (Bearing) 60-650
Bearing Weight 300 Kg
Power 10.5 / 11 KVA
Voltage 440V
Power Control 25%, 50%, 75% & 100%
Temperature Control 0 - 250°C
Maximum Temperature 400C
Accuracy Temperature ±3° C
Time – Control 0 - 99 Minutes
Residual Magnetism < 2A / cm
Overall Dimensions (wxdxh) (mm) 850 x 330 x 450
Space between supports (wxh) (mm) 255 x 255
Weight (Main Unit) 75 Kg
Weight with Standard Yokes 90 Kg
Horizontal Yoke Sizes (mm) 70 x 70 x 450
40 x 40 x 450
------
Can Heat Sealed & Pre-greased Bearings
Thermal Over Protection
Optional Accessories
Horizontal Yoke Sizes (mm) 30 x 30 x 450
40 x 40 x 450
50 x 50 x 450
60 x 60 x 450
Digital Thermometer (0-500C)
Roll - Sliding Model
Swing Arm Model
Riser Block (Pair) (mm)
Magnetic Temperature Probe