Laser Shaft Alignment Tools

Horizontal Alignment

A brand-new step by step, intuitive interface with 3D animation simplifies the operator's work and reduces time spent on alignment. A unique memory management system allows you to save progress at any stage of the process and resume whenever you want

Clock Method

An alignment method which re!uires the measurements taSen at any three of four preset clocS positions (3, 6, 9 and 12 o™clocS)

SmartSpin^™

The measured values are automatically recorded during shaft rotation. With hundreds of points registered, you can start measuring at any shaft position. The measurement !uality is controlled by a certi/ed processing algorithm based on …helley– AI, which provides the greatest possible repeatability of measurements.

SmartPoints^™

This multipoint method allows you to record an unlimited number of points at any sector of the shaft circumference. It is perfect for centering turbines and machines with sleeve bearings..

SmartAngle^™

Take measurements at any three positions of the shaft rotation. Turn shafts in any direction at least by 20 degrees and register the results. This mode is extremely helpful when the clock method is off limits.

Vertical/Flange Mounted Machines

TMeasure and align vertical and flange machines with a program specially created for this purpose.

Soft Foot Check

Adjust machine feet beforehand for better results. Soft foot check option is designed specically for this job. The program analyzes the position of machine feet, indicates if any of them need adjustment, and saves all values for the further work.

Bolt or Base Bound

Get any pair of feet locked on the machine. Enabling this option will ensure precise results when aligning base-bound or bolt-bound machines.

Select Coupling Type

This option allows you to specify the coupling type used for shaft connection – i.e., short flex or spacer shaft.

Machine Train

Enable this option and align shafts of up to five machines that are connected together

User Defined Tolerance

Specify the alignment tolerance and user definnable tolerances in advance according to the machine rotation speed.

SmartFilter^™

Keep the alignment precise under any circumstances. The averaging filter reduced the influence of external visual challenges such as lighting, steam, and other visually impairing variables while taking measurements.

VibeDr^™

VibeDr filters vibration related influences that can negatively impact precision alignment thus insuring the machines in the same proximity do not adversely effect your alignment job.

Sensor Readings^™

Monitor the data coming directly from the measuring units on the screen of your device.

Save Job^™

Save Job Feature - Allows user save alignment job status at any time and return to the job at a later time

User Friendly Reports

Save alignment reports in PDF, add photos of the unit, the company logo and work notes when necessary

Thermal Growth Expansion^™

Automatic compensation system for the thermal growth expansion of machines allows to keep the effciency of alignment in any environment.

Switchit^™

Simplify the measurements by selecting the machine location relative to an operator.

Live Move Mode

Allows live aligning in any angle position of the measuring units. When it is not possible to install the measuring units strictly in the 9–12–3 hours position.

Shims Calculator

Allows user simulate changes in alignment results with virtual movement of the machine in horizontal and vertical planes.

Repeatability Table

Allows choose any from the last 10 measurements that you have taken based on which further actions will be carried out

SmartShift^™

When it’s necessary to change the position of the laser units or change the position of the laser on the detector during the measurement, you have to use feature the Smart Shift™